Table of Contents
Advertisement
INSTALLATION
WARNING! Refer to Safety chapters.
TECHNICAL DATA
Dimensions
Height
Width
Depth
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Minimum distances
Dimension
A
LEVELLING OF THE APPLIANCE
894 - 912 mm
600 mm
600 mm
A
mm
685
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
ELECTRICAL INSTALLATION
WARNING! The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied without a main plug or a
main cable.
Applicable types of cables for different
phases:
Phase
1
3 with neutral
WARNING! The power cable must
not touch the part of the appliance
shaded in the illustration.
COVERING TERMINAL BOARD
•
The recommended cross-section area is six
square millimetres (6 mm²).
•
When you refit the mains terminal cover, make
sure that the lower tabs are located inside the
bottom edge of the aperture, before you fix the
Min. size cable
3x6.0 mm²
5x1.5 mm²
19
Advertisement
Table of Contents
