lifeSMART ZCHT1040US Manual page 12

oPERating instRuctions
4 . To set the timer to power off the heater, start
the unit and press the Timer button on the
control panel (C) or remote control (B) .
note: The timer-power-off function can only
be set when the heater is in power-on
mode .
The digital display on the control panel (C)
changes from the set temperature readout
to a time value for the timer . Press the Timer
button repeatedly to change the number
value between a range of 0 to 12 hours (in
1-hour intervals) .
The Timer light turns on when the timer is set .
5 . To set the timer to power on the heater, first
ensure the unit is powered off, then press the
timer button on the control panel (C) .
note: The timer-power-on function can only
be set when the heater is in power-off
mode .
The digital display on the control panel (C)
will indicate time value for the timer . Press
the Timer button repeatedly to change the
number value between a range of 0 to 12
hours (in 1-hour intervals) .
The Timer light turns on when the timer is set .
6 . To engage the fan only mode, with the unit
powered on press and hold the Heat mode
button for 5 seconds the on the control panel
(C)
The digital display on the control panel (C)
changes from the set mode readout to an
illuminated fan icon .
Temp Up/Down buttons will be locked during
Fan Only Mode .
4
C
5
C
6
C
FAN
12
B
TIMER
B
TIMER