Clarion DXZ615 Owner's Manual page 23

Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes
(6 programmes each) can be preset in the pre-
set buttons.
[M1], [M2] and [M3]
1. Press FNC button 3 to select DAB mode.
2. Press BND button ! to select any one shown
above.
3. Press the right or left SEARCH button % to
select a desired programme.
4. Press and hold one of Preset buttons (1 to 6) 8
for 2 seconds or longer to store the programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press FNC button 3 to select DAB mode.
2. Press BND button !. Each time you press
BND button !, the display changes in the fol-
lowing order:
[M1] [M2] [M3]
3. Press one of Preset buttons 8 to recall a
preset programme.
Note:
• Press and hold Preset button 8 for 2 seconds or
longer to store the programme currently being re-
ceived. (Manual memory)
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
The factory default setting is "ON"
If the reception of the current broadcast station
deteriorates, "SEARCHING FOR SAME STATION"
or "SEARCH" appears in the display and the radio
searches for the same programme on another fre-
quency.
Switching OFF the AF function
Switching ON the AF function
AF function between RDS and DAB
When the same programme is broadcast by both
RDS and DAB, and this function is ON, the main
unit switches to receiving the broadcast with the
better reception automatically.
[M1]...
Digital Radio / DAB Operations
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement pro-
gramme automatically.
Setting INFO standby mode
If you press and hold ISR button 9 for 1 second
or longer, "INFO" lights in the display and the main
unit is set into INFO standby mode until the se-
lected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold ISR button 9 for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode.
Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
ISR button 9 for 1 second or longer.
Information select
This is a function for selecting INFORMATION
ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
TRAVEL TRANSPORT FLASH
WARNING WARNING / SERVICE
NEWS NEWS FLASH
WEATHER AREA WEATHER FLASH
EVENT EVENT ANNOUNCEMENT
SPECIAL SPECIAL EVENT
1. Perform the following operation depending on
the connected model.
Press and hold ADJ button 2 for 1 second or
longer.
2. Press the right or left SEARCH button % to
select "INFO SEL", then push ENT button #
to enter "INFO SEL" mode.
3. Press the right or left SEARCH button % to
select an information item. You can select any
of 6 items:
27
DXZ615