Marantz SR5012 Service Manual page 74

DISASSEMBLY
Flowchart
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
FRONT PANEL ASSY
DISASSEMBLY
2. FRONT PANEL ASSY
and "EXPLODED VIEW"
H/P PCB
Ref. No. of EXPLODED VIEW : P 1
F_HDMI PCB
Ref. No. of EXPLODED VIEW : P 2
USB PCB
Ref. No. of EXPLODED VIEW : P 3
FRONT PCB
Ref. No. of EXPLODED VIEW : P 4
TOP_GUIDE PCB
Ref. No. of EXPLODED VIEW : P 9
H/S TOP_GUIDE PCB
Ref. No. of EXPLODED VIEW : P 22
SMPS PCB
DISASSEMBLY
8. SMPS PCB
and "EXPLODED VIEW"
SMPS PCB
Ref. No. of EXPLODED VIEW : P 18
TOP COVER
RADIATOR ASSY
DISASSEMBLY
3. RADIATOR ASSY
and "EXPLODED VIEW"
7CH_AMP PCB
Ref. No. of EXPLODED VIEW : P 8
GUIDE L PCB
Ref. No. of EXPLODED VIEW : P 10
TRANS
DISASSEMBLY
9. TRANS
and "EXPLODED VIEW"
POWER TRANS
Ref. No. of EXPLODED VIEW : 31
WiFi ANT
DISASSEMBLY
1. WiFi ANT
and "EXPLODED VIEW"
CABLE ASSY ANT 2.4G/5G
Ref. No. of EXPLODED VIEW : 49
INSULATION
Ref. No. of EXPLODED VIEW : 45
DIGITAL PCB
DISASSEMBLY
4. DIGITAL PCB
and "EXPLODED VIEW"
DIGITAL PCB
Ref. No. of EXPLODED VIEW : P 16
NETWORK MODULE
Ref. No. of EXPLODED VIEW : P 21
VIDEO PCB
DISASSEMBLY
5. VIDEO PCB
and "EXPLODED VIEW"
VIDEO PCB
Ref. No. of EXPLODED VIEW : P 19
PREOUT PCB
DISASSEMBLY
6. PREOUT PCB
and "EXPLODED VIEW"
PREOUT PCB
Ref. No. of EXPLODED VIEW : P 20
74
MAIN PCB
DISASSEMBLY
7. MAIN PCB
and "EXPLODED VIEW"
MAIN PCB
Ref. No. of EXPLODED VIEW : P 12
INPUT PCB
Ref. No. of EXPLODED VIEW : P 13
RS_CNT PCB
Ref. No. of EXPLODED VIEW : P 17
RS232 PCB
Ref. No. of EXPLODED VIEW : P 15
HDAM_CNT
Ref. No. of EXPLODED VIEW : P 6
HDAM PCB
Ref. No. of EXPLODED VIEW : P 7