Electrolux ECFG3068AS Installation Instructions Manual page 14

30" FULL GAS RANGE INSTALLATION INSTRUCTIONS
Save the nozzles removed from the appliance for
future use.
CAUTION
Before proceeding with the gas
conversion, the gas supply must be turned off
before disconnecting the electrical power.
Parts included with the propane gas nozzle kit:
2 x nozzle number 48
2 x nozzle number 67
1 x nozzle number 98
2 x nozzle number 102
2 x nozzle number 115
1 x nozzle number 117
1 x adhesive label for LPG nozzles
1 x nozzles change warning label
1 x sealing gasket
Setting the pressure regulator for Propane Gas
1. Unscrew regulator cap.
2. Unscrew the plastic regulator stem from the regu-
lator cap. Configuration "A" is for Natural Gas.
3. Invert the plastic regulator stem to achieve the
configuration "B" for Propane Gas and screw it in
tightly.
4. Screw the regulator stem and cap into place.
NOTE:
When converting for Propane Gas use, the pres-
sure supplied to the regulator must be between 11"
and 13" of the water column.
Replacing the Circular Dual Flame burners noz-
zles
1. Remove the cooktop grates.
2. Remove the burner cover (1), the flame-spreader
crown (2) and the burner skirt (3) from the burner
base (4).
3. Remove the tightening screws (5), the cover
plate (6) and the gasket (7).
14