Advertisement
Table of Contents
- 1 Parts List
- 2 Tools Required
- 3 Assembly Instructions
- 4 Step 1: Insert Cam Posts into Back Panel
- 5 Step 2: Insert Cam Posts into Side Panel
- 6 Step 3: Repeat Step 2 for Second Side Panel
- 7 Step 4: Line up Casters with the Guide Holes
- 8 Step 5: Press Adjustable Pins into Holes Inside the Unit
- Download this manual
Advertisement
Table of Contents
Related Manuals for Displays2go LCKDPHS Series
Summary of Contents for Displays2go LCKDPHS Series
- Page 1 HOSTESS HOSTESS STATION STATION WITH HIDDEN WITH HIDDEN WHEELS WHEELS Assembly Assembly Instructions Instructions SKUs: LCKDPHS Series SKUs: LCKDPHS Series...
- Page 2 To avoid damage to the laminated wood surfaces, keep hardware parts separated until they are needed for assembly. TOOLS REQUIRED: Phillips head screwdriver TWO PEOPLE RECOMMENDED FOR ASSEMBLY. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
- Page 3 1. Insert cam posts into back panel, then fit top and bottom panel onto posts. Then, insert cam locks and tighten to secure. NOTE: Ensure that the holes on board C are facing outward. Board A must be attached to the TOP of back panel, which is the side with more space between the holes and the edge of the board.
- Page 4 5. Press adjustable pins into holes inside the unit. Ensure that all are lined up at the same level. Then insert shelf panel to rest on the pins. Enjoy your new Enjoy your new hostess stand! hostess stand! CONTACT INFORMATION: www.displays2go.com PHONE: 844-221-3388...
Need help?
Do you have a question about the LCKDPHS Series and is the answer not in the manual?
Questions and answers