Advertisement
ASSEMBLY INSTRUCTIONS
IFDC8040 - Glass Display Case - Double Door
IMPORTANT SAFETY INFORMATION:
Read all instructions before start installing the unit. Displays2go is not responsible for any damage or injury
caused by incorrect installation, assembly or use. 3 people are recommemded for assembling.
PARTS LIST
A. Base
B. Glass Panel - Front
C. Glass Panel - Side
D. Glass Panel - Door
E. Glass Panel - Shelf
F. Glass panel - Top
G. Edge Bracket
H. Corner Bracket
I. Shelf Peg & Rubber Ring
J. Screw with Clear Washer
K. Aluminum Bar
L. "L" Metal Bracket
M. Door Hinge
N. Door Lock with Key
O. Glass Seal
A
TOOLS NEEDED
- Flat-head Screwdriver
- Phillips Screwdriver
1. Place the base (A) on the ground, insert the front glass panel (B) and 1 side glass panel (C) into grooves in the base.
Hold glass panels in place and connect them with edge bracket (G) and corner bracket (H) by using screws (J). Tighten
screws with a flat-head screw driver. Do the same for the opposite side.
CAUTION:
Be careful when handling glass!
Ver. 11/18
Unpack the base box and remove parts attached inside the base (A).
Remove glass panels from the crate and identify all glass panels.
X1
X1
B
X2
X2
X4
X1
X2
X2
X16
X28
X1
X2
X4
X1
X1
G
H
NOTE: Extra hardware is common.
O
C
D
K
I
J
M
E
F
L
N
1 of 3
Advertisement
Table of Contents
Related Manuals for Displays2go Glass Display Case IFDC8040
Summary of Contents for Displays2go Glass Display Case IFDC8040
- Page 1 IFDC8040 - Glass Display Case - Double Door IMPORTANT SAFETY INFORMATION: Read all instructions before start installing the unit. Displays2go is not responsible for any damage or injury caused by incorrect installation, assembly or use. 3 people are recommemded for assembling.
- Page 2 IFDC8040 - Glass Display Case - Double Door 2. Attach the aluminum bar (K) and 2 “L” brackets (L) 2. Attach the aluminum bar (K) and 2 “L” brackets (L) 3. Carefully place the assembled glass panel on top of the display 3.
- Page 3 Test the lock after assembling and adjust to its best fit. Scan QR code to visit the product page: To see assembly in action, please visit the product page at www.displays2go.com for a how-to video. For additional support, contact D2G customer service at 844-221-3388.
Need help?
Do you have a question about the Glass Display Case IFDC8040 and is the answer not in the manual?
Questions and answers