Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Displays2go UPTSECOLB1
Summary of Contents for Displays2go UPTSECOLB1
- Page 1 Assembly Instructions Assembly Instructions SKU: UPTSECOLB1 MTO LARGE BACKWALL...
- Page 2 PARTS LIST PART QUANTITY Scan QR code to A: Base ...........1 visit product page B: Backwall Panel (Left) ......1 C: Backwall Panel (Right) ......1 D. Screw 1.5in ........8 E. Wing Nut ..........8 F. Allen Key ..........1 If you have any questions regarding our products, please visit us at www.postupstand.com or contact customer service at 1-800-935-3534...
- Page 3 1. Lay the base panel on a flat and clean ground. Fold up the front flap and insert tabs into the precuts in the middle of the base panel. 2. Fold the back flap up and insert the tabs into corresponding cutouts in the middle on the base. Note: Do not fix the bottom.
- Page 4 3. Expand the half backwall (Right) and fold the flaps on both sides to the back. Hold the sides with both hands and place it in the middle groove on the base. Place the Left side backwall onto the base the same way. Align holes on the flaps at the center of the backwall, use screws and wing nuts to join two backwall panels.
- Page 5 5. The assembly is finished. Place the backwall in desired angle and location. Enjoy your new Enjoy your new booth backwall! booth backwall! CONTACT INFORMATION: www.postupstand.com 1-800-935-3534...
Need help?
Do you have a question about the UPTSECOLB1 and is the answer not in the manual?
Questions and answers