Displays2go LCKDPZTRBK2 Assembly Instructions

LCKDPZTRBK2 – Trash Receptacle, Black
LCKDPZTRSM2 – Trash Receptacle, Mahogany
LCKDPZTRMP2 – Trash Receptacle, Maple
To lock the cams together, slide the peg into the opening in the cam and
with a Philips head screwdriver, turn the cam clockwise to lock in place.
Drop side panel (B) into back panel (D) and lock all 4 cams. Do the same
with side panel (C) and lock all 4 cams.
Sandwich one of the "Thank You" doors between the two side panels by
3
putting one of the pegs into the hole at the top of the door and wedging
the other side panel slightly to get the other peg into the other hole. The
"Thank You" door should swing freely between the two pegs.
1
Cams and Pegs
Hinge
Hardware
Side Panels (B) (C)
Back Panels (D)
Kicker (N)
Panel (M)