Table of Contents
Advertisement
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Press
.
▶
It may take a few seconds for the
appliance to switch on.
a The appliance performs an audible
function test in the detergent
drawer.
13.2 Setting a programme
Set the programme selector to the
1.
required programme → Page 27.
If necessary, adjust the pro-
2.
gramme settings → Page 41.
13.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
Requirement: A programme has
been set.
Adjust the programme settings.
▶
The programme settings are not
saved permanently for the pro-
gramme.
Note: The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
▶
seconds.
Press
to call up the saved pro-
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
programme → Page 27.
Basic operation en
for approx. 3
41
Advertisement
Table of Contents
