Clean The Water Inlet Filters - Bosch WAL28PH1GR User Manual And Installation Instructiions

Table of Contents

Advertisement

Clean the water outlet hose and si-
4.
phon connecting piece.
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
18.7 Clean the water inlet fil-
ters.
Emptying the water inlet hose
Turn off the tap.
1.
Set the Βαμβακερά programme.
2.
Start the programme and leave it
3.
to run for approx. 70 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning and servicing en
Cleaning the filter on the tap
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Requirement: The water inlet hose is
empty.
Remove the water inlet hose from
1.
the tap.
Clean the filter with a small brush.
2.
55

Advertisement

Table of Contents
loading

Table of Contents