Table of Contents
Advertisement
en Basic operation
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances
¡ Do not use chlorine bleach
¡ Do not use dyes regularly as fixing
salt can damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 11
Turn the programme selector to a
▶
programme.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
If required, adjust the programme
2.
settings. → Page 30
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 30
Adjust the programme settings.
▶
→ "Buttons", Page 23
30
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 25
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 29
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Inserting the measuring
aid
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Advertisement
Table of Contents
