Advertisement
PLUMBING REQUIREMENTS
(1) Unit is equipped with flexible, metal braided ½ inch water supply hose with ½ inch female threaded connectors
(2) It is needed to install hot and cold shutoffs with ½ inch male threaded nipples (not included)
ELECTRICAL INFORMATION
(1) Air jet motor with heater 110 volt
(2) Whirlpool system 110 volt, optional inline heater to be installed into whirlpool system's electrical (no additional outlet required,
but available)
(3) Micro Bubble Whirlpool 110 volt, optional inline heater to be installed into system's electrical (no additional outlet required, but
available)
(4) All systems require dedicated 12-2 wire with 110 volt, 20 amp GFCI breaker
4 |
P a g e
Rev 05/2019
Advertisement
