Advertisement
NOTICE TO INSTALLERS
(1) The product requires 40-75psi water pressure, and balance hot and cold water pressure. If the end user is not satisfied with
the water pressure, have your plumber add a pressure pump on your general water supply of the house.
(2) Please make sure there is a GFCI Protection outlet on the power supply line or a GFCI breaker at the box. (only with heated
air feature)
(3) Unit must be attached to the back wall and to floor.
(4) Units come broken down in one box and is assembled with screws, nuts, and bolts on site.
(5) Note: Tub needs to be leveled in its final resting position, mark the placement, then pull tub out and begin assembly of wall
panels. It is advised to have tub onsite before preparing drain location.
(6) All fittings and connections must be checked for tightness.
a. When receiving the product, please check the package and the product, especially if there is some damage to the
packaging to make sure there is no damage from shipping. If there is damage, please notify the supplier right away
within 24hours.
(7) Make sure the floor can withhold the weight of the product, and the electricity and plumbing are according to the National
Standard.
Manufacturer reserves the right to change specs or features at anytime. Please check to
confirm details. 1-866-783-2661
3 |
P a g e
Rev 05/2019
Advertisement
