Beko VRR 80214 VB User Manual page 20

5 Operation
Remove the swab on the mop
retainer as it is shown.
Install the mop retainer to the
dust container and the water
tank assembly (two in one) in
the direction of the arrow.
5.4.2 Wet mopping setting
You may start the cleaning operation by selecting the cleaning mode and set the level of wetness during
mopping as desired in the application.
It is advised that you remove your carpets or you add a virtual wall (mop prohibited area) to the carpet
area on the application in order to keep the vacuum cleaner away from the carpet to prevent the wetting
of the carpet by the robot vacuum cleaner during the mopping operation.
20 / EN
Moisten the swab before each
mopping.
Install the dust container and
the water tank assembly (two
in one) to the appliance, their
places in the direction of the
arrow.
Place the swab to the mop retainer.
Robot Vacuum / User Manual