Beko VRR 80214 VB User Manual page 17

5 Operation
Network security requirements:
Use TKIP, PSK and AES/CCMP encrypted WPA and WPA2 networks.
5.3.2 Operation modes
Map Management
A. Real time mapping
Real time creation of a house map may help you understand the cleaning route and the cleaning
environment easily. A map of the house is created after cleaning. The map is updated in real time during
each vacuuming operation to ensure a normal navigation. To create a complete house map;
a. Open the doors of your rooms for the robot vacuum cleaner to map each room;
b. Remove any objects that may cause obstruction or blockage of the robot vacuum cleaner;
c. Do not change the location of the charging dock or unplug it after the map is created.
B. Repositioning and remapping
If the robot vacuum cleaner is relocated or significant changes are made in the environment, the robot
vacuum cleaner tries to reposition to adapt to the new environment and may create the relevant map
again. The details are as follows:
a. If repositioning is successful, the robot vacuum cleaner continues on cleaning;
b. If repositioning is unsuccessful, the robot vacuum cleaner starts over to scan in order to make the
mapping again.
A
WARNING: Ensure that the robot vacuum cleaner always starts the cleaning operation
from the charging dock.
During cleaning, do not intervene in the robot vacuum cleaner or change its location.
Robot Vacuum / User Manual
17 / EN