Epson WF-2950 User Manual page 249

LCD screen message Condition/solution
The printer's borderless The ink pad is at the end of its service life. Turn off the product and contact
printing ink pad has Epson for support.
reached the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support.
Paper Setup Auto The Paper Setup Auto Display setting must be enabled to use AirPrint.
Display is set to Off.
Some features may not
be available. For details,
see your documentation.
No dial tone is detected. Make sure the phone cable is connected correctly and the phone line works.
If you connected the product to a PBX (Private Branch Exchange) phone line
or Terminal Adapter, change the Line Type setting to PBX. If you still cannot
send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial
Tone Detection setting may cause the product to drop the first digit of a fax
number.)
System Error Turn the product off and then back on again. If you are using a Wi-Fi
connection, turn the wireless router off and on again. If the error continues,
An error occurred. Turn
make a note of the error code and then contact Epson for support.
the device off and back
on again. If this occurs
again, contact Epson
support.
The combination of the There is a problem with the network connection to your product. Check the
IP address and the solutions in this guide.
subnet mask is invalid.
See your documentation
for more details.
To use cloud services, Access your product's built-in Web Config utility and update the root
update the root certificate for your product.
certificate from the
Epson Web Config
utility.
249