Power Cleaning; Power Cleaning Using The Product Control Panel - Epson WF-2950 User Manual

• If almost the entire pattern is missing, click Finish and perform a Power Cleaning.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
If quality still does not improve, run a Power Cleaning.
Parent topic:
Related tasks
Checking the Nozzles Using a Computer Utility
Power Cleaning Using a Computer Utility
Related topics
Loading Paper

Power Cleaning

If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head
several times, you can run a Power Cleaning.
If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12
hours before running another Power Cleaning.
Note: Power Cleaning consumes more ink than Print Head Cleaning.

Power Cleaning Using the Product Control Panel

Power Cleaning Using a Computer Utility
Parent topic:
Power Cleaning Using the Product Control Panel
You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running
another Power Cleaning.
1. Press the
2. Select Maintenance > Power Cleaning.
3. Follow the on-screen instructions to run the Power Cleaning.
Print Head Cleaning
Adjusting Print Quality
home button, if necessary.
231