Advertisement
Table of Contents
"ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL
PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED"
1-866-942-5362
Please call for replacement parts or assistance:
Pacific Standard Time: 8:30 am – 4:30 pm Monday to Friday
Or visit our web site
www.whalenfurniture.com
Date: 2018-03-23
Rev. 0001-A
Whalen Furniture Manufacturing
Factory # HUXIIN
Page # 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Whalen WS184872-4B
Summary of Contents for Whalen WS184872-4B
- Page 1 PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED” 1-866-942-5362 Please call for replacement parts or assistance: Pacific Standard Time: 8:30 am – 4:30 pm Monday to Friday Or visit our web site www.whalenfurniture.com Date: 2018-03-23 Rev. 0001-A Whalen Furniture Manufacturing Factory # HUXIIN Page # 1...
- Page 2 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Lower Post (4-ea.) B- Upper Post (4-ea.) C- Wire Deck (4-ea.) D- Plastic Brackets (16-ea.) E- Tipping Restraint Hardware (2-ea.) Tool Required: Rubber Mallet, hammer, Phillips screwdriver, and power drill.
- Page 3 If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Whalen Storage at 1-866-942- 5362. We can assist you or give you directions.
- Page 4 Assembly Instructions 3. Extend the posts by having four Upper Posts (B) assembled. Fix each upper post to the lower post as shown in detail #2. Make sure each post is secured firmly before installing wire decks. Repeat step 2 to have level 3 and 4 assembled, as shown in detail #3. Adjust leveling feet as required for uneven floors.
- Page 5 TIPPING RESTRAINT HARDWARE Note: We have included two Tipping Restraint Hardware bag for this Unit. When properly installed, this restraint can provide protection against the unexpected tipping of the Unit due to small tremors, bumps or climbing. We strongly recommend mounting this hardware to a wall stud and your Unit. Please carefully read the instructions printed on the bag.
Need help?
Do you have a question about the WS184872-4B and is the answer not in the manual?
Questions and answers