Selecting The Reference Level; Measuring Functions - Bosch PLR30C Quick Start Manual

20 | English
The reception lens (12) and the laser beam output (13) must not be covered dur-
ing the measuring process.

Selecting the Reference Level

For the measurement, you can select from various reference levels:
The rear edge of the measuring tool (e.g. when placing against walls)
The front edge of the measuring tool (e.g. when measuring from a table edge)
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals

Measuring functions

Selecting/Changing Measuring Function
You will find the following functions in the Functions menu:
– Length measurement
– Area measurement
– Volume measurement
– Continuous measurement
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals
1 609 92A 6KX | (24.06.2021)
Press the button as many times as needed for the in-
dicator for the required function to appear in the
display (5).
To confirm the selection, press the button.
Bosch Power Tools