Huawei VP9650 Product Description page 19

HUAWEI VP9650
Product Description
Component
Optical port
RS-232 serial port
RST button
For service provision, connect the GE0 or GE1 network port to a gigabit switch.
l
Table 3-6 Indicators in the board front panel
Indicato
r
ACT
ALM
RUN
GE/FE
Issue 06 (2018-08-10)
CAUTION
Board indicators
Table 3-6 describes the indicators in the board front panel. The real time status of the
board can be ascertained by viewing these indicators.
Status
Steady green
Off
Steady on
Steady green
Off
Slow blinking (about 0.5
Hz, once every 2 seconds)
Quick blinking (about 4 Hz,
four times per second)
Steady green
Green off
Blinking orange
Orange off
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l This port supports the access of an optical fiber, and it
functions like a GE port.
l Do not connect cables to both the GE and optical ports. If
that happens, the optical port takes precedence.
This port is used to execute serial port commands and internal
debugging.
This button is used to reset the board.
Description
The board is the active board.
The board is operating correctly.
The board is malfunctioning.
The board is powered on but is malfunctioning.
The board is not powered on or the board fails
to start.
The board is operating correctly according to
the configuration.
The board is loading programs.
The network port connection is normal.
No connection is established on the network
port or the connection is faulty.
Data is being received or sent through the
network port.
No data is being received or sent through the
network port.
3 Product Structure
16