Table of Contents
Advertisement
B.
Lighting the Pilot Burners
The burners of this Gas Char-Grill are fitted with individual standing pilots which allows the main
burners to be turned ON or OFF without the need to manually re-light the burner each time that
it is turned OFF, as the burner will automatically light itself by the pilot burner.
Flame Failure Protection is incorporated for each burner by way of a thermo-electric system
which will shut off the gas supply to that burner in the event that the pilot burner flame goes
out, so that un-burnt gas is not expelled to the surrounding area.
1.
Select the pilot to be lighted.
2.
Depress the gas control knob and turn it counter-clockwise to "PILOT".
3.
While the knob is depressed, light the pilot burner or use the piezo igniter provided. Once the
pilot has been lit, hold the knob depressed for 10-20 seconds after lighting the pilot burner. This
is to give ample time for the gas to flow to the pilot and heat up the thermocouple.
4.
Release the knob after 10-20 seconds. The pilot burner should stay alight, if not, repeat Steps
(1 to 3 above).
5.
If pilot burner was extinguished during normal operation, wait for 5 minutes before lighting it
up.
C.
Lighting the Main Burners
1.
Select the burner to be lighted.
2.
Full flame can now be achieved by depressing the knob a little and turning it counter-clockwise
to the first stop, "HIGH" flame position.
3.
To achieve simmer control, depress the knob a little and turn it counter-clockwise to the second
stop "LOW" flame. Note that the gas control knob can be rotated between "HIGH" and "LOW"
flame to achieve your required temperature.
D.
Turning "OFF" the Main Burners
1.
Select the burner to be turned "OFF".
2.
To turn off the main burner, but keep the pilot burner lighted, rotate the gas control knob
clockwise to "PILOT" position. Notice that the main burner will extinguish and the pilot will
remain lit.
3.
It is recommended to turn "OFF" the main burners during idle periods, but let the pilot stay lit.
E.
Turning "OFF" the Pilot Burners
1.
Select the Pilot Burner to be turned "OFF".
2.
To turn OFF the pilot burner, rotate the gas control knob clockwise to " l " position. Notice that
the pilot burner will extinguish.
The surface temperature of the Char-Grill can reach over 300° C when the equipment is
operated at full setting.
CAUTION!
14
Advertisement
Table of Contents
