Application - Meditech ABPM-05 User Manual

Application

Set the cuff size during programming the monitor
The monitors recognize three different cuff sizes. The size to be
used should be set during programming of the device.
Inappropriate setting of the cuff size may lead to device
malfunctioning, which is inconvenient for the patient and may
lead to an unsuccessful measurement.
Wear a thin shirt or blouse under the cuff
It is advisable to wear a thin shirt or blouse under the cuff, because it prevents
possible problems caused by long-time wear (sweating, itching, etc.).
When properly applied, the end of the sleeve (the one closer to the tube) should fall
in the indicated range.
Connect the hose to the monitor
Connect the air connector of the cuff into the air connector socket of the device by
turning it clockwise with a slight pressure.
Take care to avoid blocking the air flow in the tube of the cuff and
twisting the tube. Make sure the cuff and its tubing do not cause
strangulation or a circulation problem. Should the patient experience arm
numbness or pain remaining after any blood pressure reading is
completed, the cuff should be removed to avoid permanent vascular or neural injury.
The application of the cuff over a wound can cause further injury! The application of
the cuff and its pressurization could result in injury to the patient because of
BP5BB5LR_UMEN_V05-20170703
Apply the cuff and be sure the artery indicator is over the
brachial artery
Place the cuff on the upper arm so that the rubber tube
points towards the patient's shoulder and the white
tissue-sign and the 'artery' indication of the cuff is
placed above the brachial artery, if possible. Contrary to
the usual placement with the tube pointing downwards,
the advantage is that the patient can wear a loose jacket
over the cuff.
15