Page 1
Assembly Instructions & User's Manual Members Mark Fremont 5pc Fire Pit Chat Set In Indigo/in Slate Item Number: Model Number: BGV01523-5IC/BGV01523-5SC Customer Assistance : 1-800-416-3511 (spare/replacement parts) or Email: customerservice@agio-usa.com THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Quality Statement.............3 Important Safety Information..........3 Before Assembly..............3 Package Contents............4 Product Information............5 Components..............6 Hardware.................6 Tools................6 Step 1 – Step 7..............7-9 Care & Use and Storage Instructions.........10 Warranty Information............10 Page 2 Need Assistance? Visit us at: samsclub.com/membersmarkhelp...
Quality Statement Important Safety Information Please read all instructions carefully before assembling this furniture. For your safety, assembly by two or more adults is strongly recommended. Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the structural integrity of the item. Hardware may loosen overtime.
Product information Weight Factory Description Dimensions Part No. Capacity Assembly 250lb per seat Swivel Glider BGV01523 28" W *32.5" D *35.5" H A.Foot Cap FC0768 Weight Factory Description Dimensions Part No. Capacity Assembly 45.75" RD * 24.5"H Firepit Table ART02000 A.Foot Cap FC0553 Description...
Components A. FIRE PIT TABLE TOP B FIRE PIT TABLE BASE C. BURNER COVER Part No.FP2900 Part No.FP2899 Part No.FP2901 Qty 1 Qty 1 Qty 1 D. BURNER PAN PROTECTIVE E. FIRE ICE RING Part No.FP2147 Part No.FP2902 Qty 1 Qty 1 Hardware (H1)
Step 1 - Step 7 Step 1 There are three factory assembled M4 screws in the firepan/burner assembly. Remove those three screws in order to remove the burner pan protective ring. Step 2 (H16) (H18) (H12) Ø20 X Ø6.5 X 2.0 MM HEX BOLT DRIVER 1/4"...
Page 8
Step 3 Place the burner pan protective ring, into the burner as shown in the diagram . Secure the burner pan protective ring to the burner pan by using three M4 screws. (H10) M4 BOLT Qty: 3 (H17) HEX BOLT DRIVER Qty: 1 NOTE: Bolts must be FULLY tightened.
Page 9
Step 6 Open the door and place the LP tank in the bottom frame. Connect the regulator. Turn the black handle clockwise to tighten. Turn the handle counterclockwise to remove. The hose must point down. Open the control door and check that the valve is turned all the way clockwise to the “OFF”...
Care & Use Instructions CARE AND MAINTENANCE FRAMES Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products. Rinse with clean water and dry thoroughly. Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames.
Page 11
Distributed by Sam's West Inc. 2101 SE Simple Savings Dr. Bentonville, Arkansas 72716-0745 Made in China Page 11 Need Assistance? Visit us at: samsclub.com/membersmarkhelp...
Need help?
Do you have a question about the BGV01523-5IC and is the answer not in the manual?
Questions and answers