Subscribe to Our Youtube Channel
Related Manuals for Displays2go SMHG Series
Summary of Contents for Displays2go SMHG Series
- Page 1 SKU: SMHG Series SKU: SMHG Series TENSION-SUSPENDED GLASS TENSION-SUSPENDED GLASS HANGING SHELVES HANGING SHELVES User Manual User Manual...
-
Page 2: Parts List
C: Double Shelf Mount .................[Optional] D: Ceiling-Mounted Hardware ................4 E: Wire ........................1 F: Glass Shelf ......................4 Multiple configurations available. Parts may vary. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388. -
Page 3: Weight Capacity
Length of Shelf + 0.5” (Length of Shelf + 0.5”) x # of shelves in row Width between wires =10” Max Ceiling Height = 20’ Floor to Ceiling Height Length of Shelf + 0.5” (Length of Shelf + 0.5”) x # of shelves in row 10”... - Page 4 1) Drill holes into ceiling, using the map on page 3 as a guide. Be sure to measure carefully, to ensure that the shelves hang properly. 2) Once the holes are drilled, insert and secure anchors into each hole. 3) Unscrew part D, remove the cone top and insert screw through the cone, as shown.
- Page 5 Attaching Glass Shelving Multiple configurations available. Parts may vary. 1) Loosen the screw in the shelving hardware and remove it. Set aside, being careful not to lose it. NOTE: Part is small and may be lost. 2) Loosen the screw that the glass will slide into; screw does NOT need to be fully removed. 3) Slide the wire into the groove on the hardware.
- Page 6 1) Drill holes into floor, using the map on page 3 as a guide. Be sure to measure carefully, to ensure that the shelves hang properly. 2) Once the holes are drilled, insert and secure anchors into each hole. 3) Unscrew part A, remove the cone top and insert screw through the cone, as shown.
Need help?
Do you have a question about the SMHG Series and is the answer not in the manual?
Questions and answers