Advertisement
OPERATIONS
Pull down the adjusting ring
Make sure the ring table indicates
the expected torque number, release
the adjusting ring
Keep the ring down and rotate the
ring to the expected torque number
according to the scale
Then operate the Torque Wrench properly
IMPORTANT: ALWAYS reset the major scale torque measurement back to "ZERO" when you are finished using the wrench. This will ensure
the internal body spring maintains accurate tension which prolongs the life and accuracy of the product.
11050/30250/31080/20250/40600
FEATURES
Adjusting Ring
Two Units
Dual-direction click-type
3
NOTE
Grip the middle of the handle
Operate vertically
Insert the driver firmly on
the socket before operating
Advertisement
