Advertisement
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT
SAFETY INFORMATION.
READ THIS INSTRUCTION MANUAL CAREFULLY AND
UNDERSTAND ALL INFORMATION BEFORE OPERATING
THIS TOOL.
• Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric
shock, fire, explosion and/or serious personal injury. It is
the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also
the responsibility of the device owner to keep this
manual intact and in a convenient location for all to
see and read. If the manual or product labels are lost
or not legible, contact Sunex Tools
If the operator is not fluent in English, the product
and safety instructions shall be read and discussed
with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that
the operator comprehends its contents.
• To safeguard torque accuracy avoid keeping tool set at
high loads for long periods of time. When finished reset
back to zero.
• Do not operate without eye and hand protection (users
and bystander).
• Keep body working stance balanced and firm. Do not
overreach when operating the tool.
PARTS REFERENCE
1
6
1 . Reversible Ratchet Head
2 . Wrench Body
3 . Major Scale
4 . Minor Scale
5 . Adjusting Ring
6 . Ratchet Drive
7 . Anti-slip Handle
No internal parts are available to purchase due to the sensitivity of this professional model.
Please utilize the repair facility listed under the warranty statement for all repairs in and out of warranty.
11050/30250/31080/20250/40600
WARNING
®
for replacements.
2
2
• Keep fingers and hands away from pinch point region of
this tool at all times.
• Do not force tool beyond its rated capacity. Overtorqueing
can cause breakage.
• Use of a "cheater bar" or leverage multipliers will result
in an inaccurate reading and can possibly damage the
wrench. Use of unapproved accessories could push the
unit beyond its rated capacity and will void your warranty.
• Do not use torque wrench to loosen fasteners.
• The wrench should be sent in for calibration once every
year or every 5,000 cycles for re-calibration.
• The wrench should be cleaned and stored properly after
every use. Do not submerge this unit in any fluid.
• Wrenches should be re-calibrated if dropped or
accidentally mishandled.
• The torque wrench should be "exercised" a minimum of
three times at 100% of full scale before use.
• Do not remove any labels. Replace damaged labels.
• This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.
• Failure to heed these warnings may reuslt in personal injury
and/or property damage.
5
4
3
7
Advertisement
