Table of Contents
Advertisement
6.6 How to set: Temperature
Press
or
to change the temperature
in steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
6.7 How to check: Temperature
You can check the current temperature in the
oven when the function or programme works.
1. Press
.
The display shows the temperature in the
oven.
2. Press
or the display shows again the
set temperature automatically after 5
seconds.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
00:00
Count Up Timer
7.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows
flashes.
1. Press
or
2. Press
.
3. Press
or
12
ENGLISH
Application
To show or change the time of day. You can change the time of day
only when the oven is on.
To set how long the oven works.
To set when the oven turns off.
To combine Duration and End Time function.
To set a countdown time. This function has no effect on the operation
of the oven. You can set the Minute Minder at any time and also when
the oven is off.
To set the count up, which shows how long the oven works. It is on im‐
mediately when the oven starts to heat. The Count Up Timer is not
turned on if Duration and End Time are set. This function has no effect
on the operation of the oven.
and 12:00. "12"
to set the hours.
to set the minutes.
6.8 How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for some
heating functions. If Faulty Tone is turned on
in the settings menu, the signal sounds if the
Fast Heat Up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and hold
for more than 3 seconds.
If the Fast Heat Up is turned on the display
shows flashing bars.
4. Press
.
The display shows the new time.
To change the time of day press
and again until
starts to flash.
7.3 How to set: Duration
1. Set a heating function and temperature.
again
Advertisement
Table of Contents
