Ac Frequency; Maintenance Reboot /Restore; About Camera - Wansview Q1 User Manual

2.6.8 AC Frequency

2.6.9 Maintenance Reboot /Restore

2.6.10 About Camera

www.wansview.com
User can adjust the power frequency,
Power frequencies include:
50HZ(220V voltage selects 50HZ),
60HZ(110V voltage selects 60HZ),
60HZ used in Japan, Canada etc.
Reboot camera if Wi-Fi connection is
not working or if the camera/app is
frozen. Please note that the setup
procedure needs to be repeated again
after Restore to Factory Settings. The
camera IP address will also change.
Here you can check the camera
information, such as Firemware, P2P
version, IP address and MAC address
Remember to exit the app
after use, to prevent battery
drainage and
consumption
data
20