Advertisement
Input Command for I/O SW11
To enable the accessibility or activation of certain button base on the receival of
input signal from I/O SW11
Push C1 and C6 together for 5 seconds to enter the programming mode. LED L5 and L6
will be solid to indicate you are in the programming mode.
-Press C11 to enable or disable input function for I/O SW11.
mapped to TRI +/-, Giving I/O SW11 the ability to receive positive input signal
mapped back to I/O SW11 as an output.
- Hold your desire button for 3 second to set as Accessible Mode* or Direct Activation
Input Command
Mode**. The Red LED backlight will indicate your setting for the button.
Mode
- Push C1 and C6 together for 5 seconds to exit the programming mode.
* Accessible Mode: you may enable the selected buttons when I/O SW11 receives
positive signal.
** Direct Activation Mode: the selected buttons will be directly enabled when I/O SW11
receives positive signal.
Re-Map for TRI.+ / TRI.-
Should the user wish to control multiple devices that may contain both positive
and negative triggering function at the same time. I/O TRI.+ / TRI.- provides the
Function
user the convenient of sending both positive and negative signal to its connected
devices at users demand.
Push C1 and C7 together for 5 seconds to enter Re-Map for TRI.+ / TRI.- Programming
mode. LED L1-2 and L9-10 will be solid to indicate you are in programming mode.
-Press your desire button for 3 second to map the button to TRI.+ / TRI.-. The Red LED
backlight being "ON" indicates the function has been activated. The Red LED backlight
being "OFF" indicates the feature has been disabled.
-Push C1 and C7 together for 5 seconds to exit the programming mode.
-The button will now activate TRI.+ / TRI.- when enabled.
-you may follow instruction "Momentary Switch Programming" to set the button as a
momentary button
- LED L1 being "ON" indicates the feature has been enabled. And C11 will now be
- LED L1 being "OFF" indicates the feature has been disabled. And C11 will be
Rapid Flashing
Accessible Mode
RED LED Backlight Status
Slow Flashing
Direct Activation Mode
- 4 -
OFF
No Interlock Setting
Advertisement
