Advertisement

Quick Links

"SHE SELLS, YOU EARN!... ®"
Midi-Kafe®
INSTRUCTIONS FOR USE &
MAINTENANCE MANUAL
Version: 15.12
Headquarters & FACTORIES:
Ataturk Industrial Zone
M. Kemal Ataturk Blv.23-25 Cigli
35620 Izmir-TURKEY
Tel
: +90 232 376 7300
Fax
: +90 232 376 7030
E-mail :
elektral@elektral.com.tr
www.elektral.com.tr

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tru-VEND Midi-Kafe and is the answer not in the manual?

Questions and answers

Summary of Contents for Elektral Tru-VEND Midi-Kafe

  • Page 1 “SHE SELLS, YOU EARN!... ®” Midi-Kafe® INSTRUCTIONS FOR USE & MAINTENANCE MANUAL Version: 15.12 Headquarters & FACTORIES: Ataturk Industrial Zone M. Kemal Ataturk Blv.23-25 Cigli 35620 Izmir-TURKEY : +90 232 376 7300 : +90 232 376 7030 E-mail : elektral@elektral.com.tr www.elektral.com.tr...
  • Page 2: Table Of Contents

    Contents Page INTRODUCTION .....................3 OPERATION AND SAFETY WARNINGS ............4 1 - GENERAL DESCRIPTION ................6 2 - MAIN UNITS .....................7 3 - TECHNICAL SPECIFICATIONS............. 13 4 - INSTALLATION AND CLEANING ............13 5 - PRODUCT LOADING AND INITIAL OPERATION ........ 15 6 - PROGRAMMING...................
  • Page 3: Introduction

    Turkish Export Assembly and IMMIB (Istanbul Mining and Metal Exporters Union). Another award won by Elektral is “The year 2013 First Rank in Innovation” organised by IAOSB (Izmir Ataturk Industrial Zone)-Ege University. Believing that real growth target is to be achieved with a global industrial understanding and a global move, Elektral is motivating all its employees with this understanding and continues rapidly with an intensive R&D work to...
  • Page 4: Operation And Safety Warnings

    OPERATION AND SAFETY WARNINGS Midi-Kafe® Procedures & Safety Warnings before using the Midi-Kafe® Technical specifications of Midi-Kafe® Installation of the Midi-Kafe® Programming and related procedures The arrow-end lightning symbol inside the The exclamation mark inside the equilateral equilateral triangle informs that there is high triangle informs the user that there are important amount of ‘un-insulated’...
  • Page 5 Midi-Kafe® Pre use, to do list and safety warnings Midi-Kafe® Do not wet the machine. Always unplug from the electricity plug before proceeding and use only a damp cloth (not wet) to clean the vending Machine. This is an electrical machine and there is a risk of electricity shock. Only authorized, qualified and well informed personnel may operate and service the machine.
  • Page 6: General Description

    1. GENERAL DESCRIPTION The Vending Machine that you have chosen has been produced by our factory using high technology systems in parallel with other developing technologies and modern aesthetic design providing versatile usage. Tru-VEND® Vending Machines can be used in all public areas such as hotels, factories, hospitals, restaurants, clinics, cinemas, bus terminals, gas stations, doctor &...
  • Page 7: Main Units

    2. MAIN UNITS 5-HINGE 1- UPPER LOCK 6- LCD DISPLAY 2- LED ILLUMINATED SHOWCASE 7- TOUCH KEYPAD 8- COINS 3- PRODUCT PAYMENT DISPENSE HOLE SYSTEM 9-HINGE 4-LOWER LOCK 10-WASTE WATER TRAY 11- ADJUSTABLE CABINET FOOT Figure 1: Front View...
  • Page 8 12- PCB 16- CUP 13- METAL DISPENSER COVER 17- CUP SINK 14-IR CUP SENSOR 15- COINS PAYMENT SYSTEM Figure 2: Rare view of the front door...
  • Page 9 29- SAFETY SWITCH 18- COFFE 30- MENU BUTTON 19- MILK POWDER 20- CHOCOLATE 21- FRUIT TEA/SALEP 22- SUGAR 23- TEA 31- MIXER 24- CLEAN WATER HOSE 25- PRODUCT FLOW HOPPER 32- FAN 26- DRIP OUTLET 33- COIN BOX 27- WATER DISCHARGE HOSE 28- OVERFLOW WATER HOSE...
  • Page 10 34- MAIN BOARD 35- WATER LEVEL SENSOR 36- RESISTANCE 45- BOILER 37- SOLENOID 46- WATER DRAIN VALVE PIPE 38-TEMPERATURE SENSOR 47- THERMOSTAT 43- FUSE 48- WATER FLOW PIPE 40- ENERGY 49- CANISTER SOCKET MOTOR 41- WATER DISTRIBUTER 50- WATER PUMP 42- CLEAN WATER HOSE 51- MIXER MOTOR...
  • Page 11 2.1 Trunk Main parts inside the trunk are explained hereunder. Items supplied with the machine: 1 waste water sink, 4 cabinet feet, 1 power cable, 1 safety switch device (U shaped plastic piece), 1 user manual. 2.1.1 Boiler The boiler tank capacity is 4,5 L and is equipped with an 1800 W Immersion Heater. The safety of the Boiler Tank (See Figure 4 - 45) is controlled by a Temperature Sensor and Level Probe.
  • Page 12 2.1.3 Mixers and Mixer Motors Powder form soluble hot drinks are being prepared ready to be presented in mixer bowls with hot water. There are 4 mixers and mixer motors in a standard Midi-Kafe coffee vending machine (See Figure 4 - 31, 51) The positions of Mixers and Mixer Motors are standard and not interchangeable.
  • Page 13: Technical Specifications

    Touch keypad Electronic Module c) LCD Display Electronic Module All models are being produced by Elektral. Spare parts and module replacements have to be done by authorized personnel only, otherwise irreversible damage can be caused to the machine and the guarantee becomes void 3.
  • Page 14 The water temperature during self-cleaning (automatic) process of the mixers has to be hot (as same as when the machine is in operation) Chemical solutions must not be used during cleaning the machine by hand. Only warm water should be used. Disconnect the machine from the electricity supply when the machine is cleaned by hand.
  • Page 15: Product Loading And Initial Operation

    The cups have to be slick, not wet and not crushed. Do not mix plastic and carton cups  Plug the machine to an earthed electricity power supply.  When the front door is closed the machine automatically starts working. Note: If you need the machine to operate while the front door is open, the safety key lid has to be placed on the key.
  • Page 16 SUGAR(-) button SELECT/SAVE/YES, SPECIAL button is used to scroll UP in the menu, HOT WATER button is used to scroll DOWN in the menu Open the machine door in order to enter the menu. Put the safety key apparatus on the safety key and press the red button in the top right corner of the machine.
  • Page 17 2- Using buttons UP(SPECIAL) and DOWN(HOT WATER) choose the menu to make alterations and press button SUGAR(-) (SELECT) 3- Press button SUGAR(-) (SELECT) in the menu showing total AMERICANO counters to reset, press button SUGAR(+)(EXIT) to exit the menu RESET? without resetting Global Counter: Shows the number of drinks dispensed from the time the machine has started operating.
  • Page 18 MAXIMUM CREDIT 4- Press button SUGAR(-) (SELECT) to save, press button [4/1/2] SUGAR(+)(EXIT) to exit the menu without saving Free Vend: Enabling or Disabling Free Vend is done here. ACCEPTED COINS [4/1/3] Maximum Credit: The maximum amount of money to be accepted by the machine can be adjusted in this menu.
  • Page 19 6.4.4 Limit Temperature LIMIT [4/4] Using this feature dispensing of drinks is allowed only within certain temperature limits. When the water temperature drops to the specified minimum limit figure, dispensing of drinks stops and LIMIT when the temperature reaches above the minimum limit, 80 ⁰C 85⁰C dispensing of drinks starts again.
  • Page 20 6.4.10 Factory Reset DAFAULT SETTINGS [4/10] This menu allows a factory reset which resets all settings to factory default except the Global Counter and Vends Total. DAFAULT SETTINGS APPLY? 6.5 Testing and Cleaning TEST & CLEANING 6.5.1 Manual Cleaning MANUEL CLEANING Manual cleaning mixers are used for performing manual cleaning [5/1] procedure.
  • Page 21: Optional Parts

    EXPORT LOGS [6/1] Export Logs: Exports logs from the machine to a USB disk. Delete Logs: Deletes the logs saved inside the machine (not DELETE LOGS inside the USB disk) [6/2] Export Settıngs: Exports all settings of the machine in to a USB EXPORT SETTINGS disk [6/3]...
  • Page 22: Menu Tree

    9. MENU TREE 3.2.2 VENDS PARTIAL PRODCUT PRICES 2.4.5 WATER AMOUNT 3.2.3 COINBOX PARTIAL 2.4.5.1. WATER AMOUNT 4,5 s ..1.1. PRODCUT1 PRICE (AMERICANO) 3.2.7 RESET AUDITS 1.1.1. PRODCUT1 PRICE(AMERICANO) 2.5 PRODUCT 5 DOSAGES (CHOCO MILK) 4. SETTINGS 000000.50 EUR 2.5.1 CHOCOLATE AMOUNT 4.1 VALIDATOR...
  • Page 23 6 USB MENU 6.1 EXPORT LOGS 6.2 DELETE LOGS 6.3 EXPORT SETTINGS 6.4 EXPORT AUDIT 6.5 IMPORT SETTINGS 6.6 UPGRADE SOFTWARE 7 DEVICE INFO 7.1 DEVICE INFO S/N 7.2 DEVICE INFO F/W 7.3 DEVICE INFO H/W IMPORTANT NOTE: THE VALUES STATED ARE DEFAULT FACTORY SETTINGS.
  • Page 24: Service Centre And Certificate Of Warranty

    All Warranty Services are at our Factory. All transportation risks and costs to and pro our Factory belongs to Customer. Thank you for selecting a product manufactured by ELEKTRAL A.S. Before using your new item please take a minute to read and fill out the forms on the reverse side of this card.

Table of Contents