TP-Link Archer TX20U Plus Quick Installation Manual page 2

2
Install Driver
a. Go to My Computer or This PC.
b. Double click the TP-Link disk then run
SetupInstall.exe to install driver.
SetupInstall
Note:
If you cannot find the setup program, please
download the driver at www.tp-link.com/support.
3
Join a Wireless Network
a. Click the network icon (
taskbar.
b. Select your Wi-Fi network, click
Connect and enter the password when
prompted.
Connections are available
Wireless Network Connection
TP-Link_XXXX
Connect automatically
√
Troubleshooting
or ) on the
If you have problems during the installation,
please refer to the following online FAQs.
T1. Can't find the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can't find or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can't install the driver:
https://www.tp-link.com/faq-2252.html
For technical support, replacement
Connect
services, user guides, and other
information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
· Do not attempt to disassemble, repair, or modify the device.
· Do not use the device where wireless devices are not allowed.
· Keep the device away from water, fire, humidity or hot environments.
· This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).