Making An E-Response Help Call; Transferring A Call To Another Extension - Iwatsu ADIX VS Owner's Manual

Making an E-Response Help Call

The E-Response Help Call feature allows specific system extensions to
simultaneously call a group of extensions and access a system paging port
upon dialing a specific ICM Group access number or, if the station remains
off-hook without dialing for a programmable period of time. When the E-
Response help call is placed, the key telephone displays of the called
extensions in the E-Response ICM Group will display a programmed
message and the calling party's extension number and station ID.
Operation
Lift the receiver and remain off hook on intercom for a
specific time period programmed in the system.
Or
Lift the receiver to make an intercom call. Begin dialing.
Between digits stop dialing for more than 10 seconds.
Note: If a user dials a valid trunk access or optimized routing
access code, this feature will not activate.
Or
Dial the E-Response Group access number when you hear the
Intercom Dial Tone.

Transferring a Call to Another Extension

Operation
When speaking on an outside line:
Press and release the receiver button quickly
Wait for the dial tone
Dial the desired extension number
Hang up or announce the call, then hang up
If the call is not answered it will return to your phone.
Single-Line Telephone User's Guide - 128