Answering A Call That Returns To The Attendant Position; Making An Outgoing Call; Making An Intercom Call; Making An E-Response Help Call - Iwatsu ADIX VS Owner's Manual

Answering a Call that Returns to the Attendant
Position
Calls that were transferred and not answered, on Hold or Call Park too long,
will ring at the attendant position.
Operation
To answer a call that returns to the Attendant Position:
Lift the receiver

Making an Outgoing Call

Operation
Lift the receiver
Press the desired outside line and the lamp will flash green
Wait for the dial tone
Dial the desired phone number

Making an Intercom Call

Operation
Lift the receiver
Wait for the dial tone
Dial the desired extension number
Or
Press the designated button for the desired extension number
on the Direct Station Selection Unit

Making an E-Response Help Call

The E-Response Help Call feature allows specific system extensions to
simultaneously call a group of extensions and access a system paging port
upon dialing a specific ICM Group access number or, if the station remains
off-hook without dialing for a programmable period of time. When the E-
Response help call is placed, the key telephone displays of the called
extensions in the E-Response ICM Group will display a programmed
message and the calling party's extension number and station ID.
Operation
Dial the E-Response Group access number when you hear the
Intercom Dial Tone.
Attendant Position Features - 115