Table of Contents
Advertisement
Call Coverage
The Multipurpose buttons on the Digital Telephones may be programmed to
allow both audible and visual indication of a call ringing at another
extension. Calls made to an extension that is represented as a Call
Coverage button on another phone may be answered by that phone by
pressing the Call Coverage button. The visual indication is immediate and
the audible indication may have one of the three modes: immediate,
delayed, or no ring. When the extension monitored by a Call Coverage
button is not in the ringing state, the Call Coverage button will function as a
Direct Station Selection/Busy Lamp Field button. The Call Coverage
feature will support Intercom Tone (ringing) and Outside Line calls.
Intercom calls are indicated by a slow flashing green lamp and Outside Line
calls are indicated by a fast flashing green lamp. A good application for this
feature would be a secretary that needs to answer calls for others in the
office if they are away from their phones.
Operation
To answer a call ringing at another extension:
When you hear the special Call Coverage tone or see either a slow
or fast green flashing lamp on a Call Coverage button:
Lift the receiver
Press the desired Call Coverage button
You will be connected to the calling party. Intercom calls will
appear on your phone's Intercom button ICM and Outside Line
calls will appear on your phone's Outside Line button.
To change the audible indication mode:
Do not lift the receiver
Press the Feature button FEAT
Press the desired Call Coverage button and the present mode
will be represented by the lamp on the button and the display.
immediate: display = Immed.
delayed:
display = Delayed
no ring:
display = No ring
1
Dial
for immediate ring mode
2
Dial
for delayed ring mode
Dial
3
for no ring mode
Digital Telephone User's Guide - 66
lamp = fast green flash
lamp = slow green flash
lamp = solid green
Advertisement
Table of Contents
