IMPORTANT PRECAUTIONS ENGLISH SAVE THESE INSTRUCTIONS When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
Page 3
WARNING DANGER TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS: TO REDUCE THE RISK OF ELECTRICAL SHOCK: • At NO time should pets or children under the age of 13 be closer to the treadmill than 10 feet. •...
GROUNDING INSTRUCTIONS Place the treadmill on a level and stable surface. There should be one foot of clearance in front of the treadmill for the power cord. Please leave a clear zone behind the treadmill that is at This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance least the width of the treadmill and at least 79”...
Page 5
ASSEMBLY WARNING There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have parts that are not tightened and will seem loose and may cause irritating noises.
PRE ASSEMBLY TOOLS INCLUDED: TABLET/READING RACK 6 mm T-Wrench CONSOLE CONTROL PANEL & DISPLAY 6 mm L-Wrench WARNING WINDOWS PARTS INCLUDED: DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift MULTI-STORAGE AREA 1 Hardware Kit treadmill from packaging until specified to do so in the assembly 1 Safety Key PULSE GRIP HANDLEBARS instructions.
ASSEMBLY STEP 1 ASSEMBLY STEP 2 Open HARDWARE FOR STEP 2. HARDWARE FOR STEP 1 HARDWARE FOR STEP 2 NOTE: The treadmill was folded in the carton PART TYPE DESCRIPTION when purchased. Follow these steps to unfold PART TYPE DESCRIPTION Carefully lift the HANDLEBAR (4) upward until it and assemble the treadmill.
Page 8
ASSEMBLY STEP 3 ASSEMBLY STEP 4 Carefully lift the CONSOLE (5) upward until it is ASSEMBLY COMPLETE! in the upright position. EVOLVE 3.0 User Weight Capacity: 113 kg / 250 lbs.
TREADMILL OPERATION This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the TREADMILL GUIDE has instructions for the following: • LOCATION OF THE TREADMILL • USING THE SAFETY KEY • FOLDING THE TREADMILL •...
CONSOLE OPERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) LED DISPLAY: Calories, Time, Distance, Speed, Heart Rate. B) START/STOP: press to begin exercising, start your workout, or resume exercising after pause. press to pause/end your workout.
GETTING STARTED 1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill. 2) Plug in the power cord and turn the treadmill ON. (The ON/OFF switch is next to the power cord.) 3) Stand on the side rails of the treadmill.
Dut: Verwijderingsaanwijzing VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness producten zijn recyclebaar. Breng het apparaat aan het einde P2) CALORIES: Set goals for burning calories. Choose from 300, 500, 700. Calories burned are calculated using van de gebruiksduur naar een in recycling gespecialiseerd bedrijf (plaatselijk verzamelpunt).
Need help?
Do you have a question about the EVOLVE 3.0 and is the answer not in the manual?
Questions and answers