Advertisement
Safety Information
IMPORTANT SAFETY INFORMATION
WARNING: RISK OF SHOCK. House electric current
can cause painful shock or serious injury unless
handled properly.
For your safety, always remember to:
□ Turn off the power supply at the fuse or circuit breaker box
before you install the fixture.
□ Ground the fixture to avoid potential electric shocks and to
ensure reliable starting.
□ Double-check all connections to be sure they are
tight and correct.
□ Wear rubber soled shoes and work on a sturdy
wooden ladder.
This fixture is designed for use in a circuit protected by a fuse or
circuit breaker. It is also designed to be installed in accordance with
local electrical codes. If you are unsure about your wiring, consult a
qualified electrician or local electrical inspector, and check your local
electrical code.
WARNING: RISK OF CUTS. Some metal parts in the
fixture may have sharp edges. To prevent cuts and
scrapes, wear gloves when handling the parts.
Account for small parts and destroy packing material, as these may
be hazardous to children
.
CAUTION: Turn off the main power at the circuit
breaker before installing the fixture, in order to
prevent possible shock.
GENERAL: All electrical connections must be in accordance
with local and National Electrical Code (N.E.C.) standards. If
you are unfamiliar with proper electrical wiring connections
obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box
and make sure that no parts are missing by referencing the
illustrations on the installation instructions.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Note: This equipment has been tested
and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit different from that
to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help.
Advertisement
