Advertisement
The key to correct chair assembly is to loosely attach all of the bolts, then gradually tighten them in
succession until all of them are secure. Completely tightening one or more bolts prematurely can
result in the following:
ISSUE: CHAIR IS UNLEVELED
Cause:
Chairs can be wobbly or unleveled if one or more bolts are fully tightened before
all bolts are attached and / or tighten.
surface than where the product is intended to primarily reside.
Solution:
Loosen each bolt in the seat box (front
legs, back corner-blocks, and back apron)
until they are adjustable by hand. Place
the chair upright on the floor. Press firmly
and evenly on the seat edges until the
product sits level but do not lean against
the chair back. Once the chair sits level
on the desired surface, fully tighten each
bolt.
When assembling your chair, make sure
to do it in the location that the chair will
most often be used. Uneven flooring
frequently accounts for wobbling issues.
ISSUE: HOLES ARE MISALIGNED
Cause:
This issue can occur when some bolts are tightened fully before all other bolts are
tightened or attached.
Solution:
Loosen each bolt in the seat box (front legs, back corner-blocks, and back apron)
bolts to the frame.
Chair Assembly Tips
Loosen bolts until
adjustable by hand
PAGE 2 OF 4
Advertisement
