2K Furniture Designs D515 Assembly Instructions

Glass top dining table

Download this manual

ASSEMBLY INSTRUCTIONS

MODEL #D515 DINING TABLE

NOTE TO CUSTOMERS:

For ease and speed of assembly we recommend that before you commence each step of the

assembly that you identify all the parts required to complete that step.

We recommend that where possible you allow sufficient space to assemble the item as close

as possible to the place where it will be once assembled.

For the protection of your furniture we recommend that the product is placed on protected

surfaces during assembly to prevent any damage.

During assembly do not over tighten the screws or bolts, as this may damage the product.

Please ensure you retain all the product packaging until the item is completely assembled.

Periodically check all fitting and re-tighten as necessary.

Never allow any liquids to remain on your furniture as absorption can cause the wood to warp

or finish to de-laminate.

It is recommended that this item should be assembled by two adults.

PAGE 1 OF 3

Page 1 ASSEMBLY INSTRUCTIONS MODEL #D515 DINING TABLE NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
Page 2 ASSEMBLY INSTRUCTIONS ITEM # D515 DINING TABLE PARTS IDENTIFICATION Glass Table Top 1 pc Table Base Panel(L) 2 pcs Table Base Panel(R) 2 pcs Mounting Panel 1 pc HARDWARE IDENTIFICATION Ø4mm 12 pcs Screws M4 x 32 1 1/4” Minifix Connecting Bolt...
Page 3 ASSEMBLY INSTRUCTIONS ITEM # D515 DINING TABLE STEP 2 Place the mounting panel(D) upside down and place the assembled legs(B&C) within the marked lines on the mounting panel. Use screws(1) to attach the table base to the mounting panel. Make sure all screws and connecting bolts are fully tightened before turning the table upright.