Part List Divider Right Side Panel Left Side Panel Bottom Panel Top Panel Left Shelf Right Panel Back Panel A10. A11. A12. Left Door Right Door Large Drawer Front Panel Divider A13. A14. A15. A16. Large Drawer Bottom Panel Large Drawer Back Panel Drawer Side Panel- R Drawer Side Panel-L A17.
Hardware List Camlock Screw Wood Dowel Screw Shelf Support Magnet Screw Drawer Knob B10. B11. B12. Magent Anchor and Screw Door Handle Anti-tip Kit Step 1: 1SET 1SET B10: Assemble Magnets B8 & B10 to Divider A3 using included screws. Note: Holes are pre-drilled.
Page 5
Step 2: Cross Dividers A3 &A9 as shown above. Step 3: 4SETS 4PCS Assemble Side Panels A1 &A2 to Divider A3 using Camlocks B1 & Wood Dowels B2 as shown above. Page 5 of 10...
Page 6
Step 4: 6SETS 6PCS Assemble Side Panels A1 & A2 to Bottom Panel A4 using Camlocks B1 and Wood Dowel B2 as shown above. Step 5: 6SETS 6PCS Assemble Side Panels A1 & A2 to Top Panel A7 using Camlocks B1 and Wood Dowel B2 as shown above.
Page 7
Step 6: 22PCS Attach Back Panel A8 to the back of the unit using Screws B3 as shown above. Step 7: 8PCS Insert Shelf Supports B7 into holes on Side Panels A1 & A2, Divider A9, then put Shelves A5 & A6 onto Shelf Supports B7 as shown above.
Page 8
Step 8: 12SETS 3PCS Assemble Left Door A10 to Side Panel A1 using Screws B5 as shown above. Then attach Handle B9 to Left Door A10 using included bolt. Repeat above step to assemble the other doors. Step 9: 8PCS 2SETS Page 8 of 10...