2K Furniture Designs D503 Assembly Instructions

Counter dining table

Download this manual

ASSEMBLY INSTRUCTIONS

MODEL #D503 COUNTER DINING TABLE

NOTE TO CUSTOMERS:

For ease and speed of assembly we recommend that before you commence each step of the

assembly that you identify all the parts required to complete that step.

We recommend that where possible you allow sufficient space to assemble the item as close

as possible to the place where it will be once assembled.

For the protection of your furniture we recommend that the product is placed on protected

surfaces during assembly to prevent any damage.

During assembly do not over tighten the screws or bolts, as this may damage the product.

Please ensure you retain all the product packaging until the item is completely assembled.

Periodically check all fitting and re-tighten as necessary.

Never allow any liquids to remain on your furniture as absorption can cause the wood to warp

or finish to de-laminate.

It is recommended that this item should be assembled by two adults.

PAGE 1 OF 3

Page 1 ASSEMBLY INSTRUCTIONS MODEL #D503 COUNTER DINING TABLE NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
Page 2 ASSEMBLY INSTRUCTIONS ITEM # D503 DINING TABLE PARTS IDENTIFICATION Table Top 1 pc Leg Frame 2 pcs Aprons 2 pcs Upper Shelf 1 pc Bottom Shelf 1 pc HARDWARE IDENTIFICATION Ø8mm JCBC Bolt M6 x 50mm 4 pcs 2 ”...
Page 3 ASSEMBLY INSTRUCTIONS ITEM # D503 DINING TABLE STEP 1 STEP 2 Repeat Step 1 to assemble the other side of leg frame. STEP 3 Place Table Top upside down, Place the table base within the marked lines on the table top.