Headset or Handsfree profiles. For the latest compatibility information, please visit us at www.iqua.com. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IQUA is licensed. Other trademarks and trade names belong to their respective owners.
BHS-608_UG_en.fm Page 3 Wednesday, August 10, 2005 4:27 PM Introduction Thanks for purchasing a Iqua Bluetooth Smart Badge BHS-608. Your Smart Badge is a stylish product that enables comfortable hands-free communication with compatible mobile phones that supports Bluetooth wireless technology.
Page 6
BHS-608_UG_en.fm Page 4 Wednesday, August 10, 2005 4:27 PM (1) Power key Power on/off and mute button, switches the headset on and off or mutes the on-going call. (2) Indicator Light • Power on - green light flashes 5 times and beeps once •...
Page 7
(6) Send / End key • Answer incoming call • Switch between the headset and phone mode by pressing the button for a long time • Redial the last number dialed by pressing the button twice when no call is being made •...
BHS-608_UG_en.fm Page 6 Wednesday, August 10, 2005 4:27 PM Getting Started Remove all of the components from the package: 1. Smart Badge 2. USB cable 3. Plastic window 4. Carrying Case 5. Travel Charger 6. User Guide Figure 2...
BHS-608_UG_en.fm Page 7 Wednesday, August 10, 2005 4:27 PM Charging the Battery Before using Smart Badge, you must charge the product for approximately 5 hours. Once the battery is fully charged, it will provide up to 40 hours of talk time and up to 600 hours of standby time.
Page 10
User Guide. Set the phone to search for Bluetooth devices as instructed in your phone's User Guide. Select BHS-608 from the list. Enter the pin code 0000 to connect (or "pair") your Smart Badge and your phone Your Smart Badge will beep once, after which a blinking blue indicator light will indicate that the Bluetooth connection is active.
The Smart Badge will also be disconnected if the battery is empty. Note that you do not need to delete the pairing with the headset to disconnect it. When you reconnect a paired headset, you will not be asked for its pin code again.
Note that the call functions depend on what phone you are using. Answering and Ending a Call When you receive a call, you will hear a ringing tone through the headset and receive a vibration alert. Press the Send/End key to answer the call or to end the currently active call.
BHS-608_UG_en.fm Page 11 Wednesday, August 10, 2005 4:27 PM Rejecting a Call When you receive an incoming call that you do not want to answer, simply press the Send/ End key twice. Redialing the Last Dialed Number Press the Send/End key twice when no call is in progress. Muting an on-going Call You can mute or unmute the on-going call by briefly pressing the Power key.
BHS-608_UG_en.fm Page 12 Wednesday, August 10, 2005 4:27 PM Switching the Call between Phone and Headset Mode Press and hold the Send/End key or use the Respect function in your phone. Switching between on-going calls and waiting calls When a call is being made and another call is coming in, simply press the Volume down key and hold it down for 2 seconds or use the respect function in your phone.
– Do not expose the headset to high or low temperatures. – Do not allow your headset to come in contact with sharp objects as this will scratch and damage the headset. – Do not stick anything inside of the headset as this may damage internal components.
BHS-608_UG_en.fm Page 14 Wednesday, August 10, 2005 4:27 PM Product Specifications Bluetooth Specification: Version 1.2 Bluetooth Profile Supported: Headset and Handsfree Profiles Rang of Frequency: 2.4GHz Spectrum Dimensions: 100mm (L) x 70mm (W) x 13mm (H) Weight: 45 g (main body)
Page 17
BHS-608_UG_en.fm Page 15 Wednesday, August 10, 2005 4:27 PM 12 MONTH LIMITED WARRANTY IQUA Ltd. warrants that this product is free from material and workmanship defects for a period of 12 months from date of purchase provided the following terms of this warranty are satisfied.
Page 18
IQUA Ltd. reserves the right to make changes or improvements in design or manufacture without having any obligation to install such changes in existing and sold products.
Need help?
Do you have a question about the BHS-608 and is the answer not in the manual?
Questions and answers