Iqinvision IQD30SV-F1 Installation And Operating Instructions Manual page 8

2. Mount the IQeye Mini Dome camera base to the desired wall or ceiling
surface using the supplied or equivalent mounting hardware.
3. Remove the camera shroud by placing
the palm over the top of the shroud, then
gently squeezing the two tabs toward the
front of the shroud toward the center of
the camera. Pivot these tabs away from
the camera then pull the shroud off the
camera as shown in Image 6.4.
4. Set the field-of-view using the IQeye
Mini Dome's 3-axis gimbal.
5. Focus the camera by twisting the fixed-focal length lens clockwise or counter-
clockwise to achieve the desired focus.
6. Replace the camera shroud by first positioning the shroud against the rear
shroud tab then pivoting the shroud down toward the front two mounting
tabs. Squeeze the shroud gently and push it down to engage the front two
mounting tabs.
7. Replace the trim cover
Standard Camera Model: attach the camera trim
cover to the camera by pushing it gently on to the
camera. You should hear an audible SNAP as the
trim ring fastens into place.
8
Image 6.4
Image 6.5