Iqinvision IQD30SV-F1 Installation And Operating Instructions Manual page 10

2. Pull the PoE Ethernet cable through the cable pass-through in the camera
base plate and connect it to the camera's Ethernet port.
3. Attach the camera base plate to the wall mount using the supplied
qty. (2) machine screws.
4. Setup the camera as described in steps 3-6 in section 6.
8. IQeye Mini Dome Pendant Mount
Installation
Standard Camera Model
The IQeye Mini Dome Single-Gang Pendant Mount
Adapter is designed to easily mount the Mini Dome
via a ¾" NPT conduit (not supplied).
1. Pull the PoE Ethernet cable through the top of
the Pendant Mount and attach the Pendant Mount
to the conduit by threading the pendant cover to the
conduit as shown in Image 8.1.
2. Pull the PoE Ethernet cable through the cable
pass-through in the camera base plate and connect
it to the camera's Ethernet port.
3. Attach the camera base plate to the Pendant mount
using the supplied qty. (2) machine screws.
10
Image 8.1