Listening To A Cassette Tape - Teac AD-850-SE Owner's Manual

You can play Normal (type ), Chrome (type ) and Metal (type ) tapes
with this unit .
1
Press the SOURCE button repeatedly to select "TAPE".
< When a different source is selected, starting tape playback
automatically selects the tape .
2
Press the TAPE EJECT ( L ) button to open the cassette
tape compartment.
3
Put a cassette tape in the compartment.
Insert the cassette tape with its open edge facing down and the
side that you want to play facing you . Then, close the cassette
compartment by pushing its door in .
ATTENTION
o Do not use deformed or slack cassette tapes . The tape could
become tangled, and the cassette might become stuck in the
unit .
o Do not force the door of the compartment by hand when
opening it .
Failure to follow any of the above could cause malfunction .
24

Listening to a cassette tape

4
Pausing playback temporarily
Press the TAPE Pause (J) button during playback to stop playback
at the current position .
To resume playback, press the TAPE Pause (J) button again or
press the TAPE Play (t) button .
Stopping playback
Press the TAPE Stop (H) button to stop playback .
Press the TAPE play (t) button to start playback.