Listening To A - Teac AD-850-SE Owner's Manual

1
Press the SOURCE button repeatedly to select "CD".
< When a different source is selected, pressing the CD Play (t)
button automatically selects the CD and, if a disc is loaded, starts
playback .
2
Press the CD OPEN/CLOSE (L) button to open the disc
tray.
3
Place a disc on the tray with the label side up.
< Always confirm that the disc is centered on the tray . The disc
must be centred on the disc tray . If a disc is not correctly loaded,
it might not be possible to open the tray again after it has been
closed .
ATTENTION
< Do not load more than one disc .
< Do not force the tray by hand when opening and closing it .
< Do not attach adhesive labels or similar materials to either side
of a disc .
< Do not use irregularly-shaped discs .
Failure to follow any of the above could cause malfunction .
18
Listening to a CD
4
Press the CD OPEN/CLOSE ( L ) button again to close the
tray.
CAUTION
Be careful not to let your finger be pinched by the tray.
Loading a disc takes a few seconds .
During loading, "READING" appears on the display and no buttons
will work . Wait until the total number of tracks/files is displayed .
< When no disc is loaded, "NO DISC" is displayed .
5
Press the CD Play (t) button to start playback.
Playback starts from the first track/file on the disc .
< If you load a disc, and then press the CD Play (t) button
without having first closed the disc tray, the disc tray closes and
playback starts .
< When playback of all the tracks/files has finished, the unit stops
automatically .
< MP3 files that are not placed in folders are automatically put in
the "ROOT" folder . Playback starts from the first file in the ROOT
folder .
< See page 40 for information about the playback order of MP3
discs .