Maintenance - UNIVIEW Uniarch IPC-P4P4-X25 Quick Manual

properly fastened. Ensure that the cable is not tense during mounting, with a
proper margin reserved to avoid poor port contact or loosening caused by shock
or shake.

During transportation, special attention is required to protect the transparent
dome cover from friction, scratch and stain, etc. Do not remove the protective
film from the cover until mounting is finished. Remove the protective film before
powering on the device.

Contact professionals for maintenance information. Do not attempt to dismantle
the device by yourself. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
2.2

Maintenance


If there is grease or a dust stain on the front glass surface, clean the glass surface
gently from the center outward using anti-static gloves or an oil-free cloth. If the
grease or the stain still remains, use anti-static gloves or an oil-free cloth dipped
with detergent and clean the glass surface gently until it is clean.

If there is dust on the front glass surface, remove the dust gently using an oil-
free brush or a rubber dust blowing ball.

Do not use organic solvents (benzene, alcohol, etc) to clean the camera.
3
Appearance
3.1
Dimensions
The following figure shows device dimensions. The appearance may vary with device
model.
Type A
133.0mm
(5.2")
185.0mm
(7.3")
Type B
133.0mm
(5.2")
185.0mm
(7.3")
4