UNIVIEW Uniarch IPC-P4P4-X25 Quick Manual page 3

3. Install the supplied waterproof components to the network cable in sequence.
CAUTION!
You need to mount the rubber ring onto the network cable interface first.
4. If your camera has a DC cable and you will not use it, insert the plug into the
interface.
5. (Optional) After the waterproof treatment is completed, put the cables into a
waterproof junction box (purchased separately).
CAUTION!
 The cable connector must not be exposed and must be kept away from water.

Restore and fasten the device after dismounting.
 Place the power adapter in a power distribution box.
Tighten Tighten
Wrap the unused cables together into a bundle
DC interface
Plug
2
Tighten
Waterproof tape