Subscribe to Our Youtube Channel
Related Manuals for ParaZero SafeAir 2 RC 2.0
Summary of Contents for ParaZero SafeAir 2 RC 2.0
- Page 1 RC manual for SafeAir 2 RC 2.0 Ports and Switches Trigger switch Main screen Control keys Belt clip Maintenance port Power switch Charging port...
- Page 2 Main screen messages ② ① ③ SafeAir RC Low Bat ④ Category Icon/Label Buzzer indication Meaning ① RC RC is charging battery level Battery is at 100-80% Battery is at 80-60% Short beep every Battery is at 60-20% 20 seconds Battery is critically low 20-0% ②...
- Page 3 Charging instructions Turn the power switch is off and plug the RC to a 5V power source via the USB C cable. The main screen shows the charging status. Notice: the percentage updates every few minutes. Charging 079% ●●●●● The following indication shows means low power. Charge the RC when this indication shows. ●...
- Page 4 Operation Monitor Main screens messages to verify proper operation of the RC and SafeAir systems. In addition to the ATS, the SafeAir system may also be triggered manually by the RC signal (optional). The system can only deploy when it is in Armed mode. In order to manually trigger the system, press and hold the RC Trigger switch until the SafeAir system deploys.
Need help?
Do you have a question about the SafeAir 2 RC 2.0 and is the answer not in the manual?
Questions and answers