Nokia CR-82 Manual page 5

Place or remove a device
Do not place or remove a mobile
device while driving.
Place the device into the holder
from the top. If the charger
connector is located at the bottom
of your mobile device, slide the ring
to align the charger plug with the
charger connector (5). Gently push
Attach to a mounting device
To attach the mobile holder to a
compatible Nokia mounting device,
remove the protection plate with
the Nokia text from the holder,
attach the holder to the mounting
device with the supplied screw, and
replace the protection plate (1).
Copyright © 2007 Nokia. All rights reserved.
the device downwards to insert the
charger plug into the charging
connector, and press the arms to
lock the device firmly in place (6).
To remove the device, press the
release buttons, and pull the device
out (7).
When you attach the mobile holder,
ensure that the display of the
mobile device is clearly visible for
the user. For your safety, install the
holder in the upright position.
5